|
|
 | Home | VELCRO Products | Hook and Loop | Our Services | Useful Resources |  |
|
|
VELCRO – SELF ADHESIVE PS14 PRESSURE SENSITIVE ADHESIVE PS14 Base material Rubber resin Colour Amber Shelf Life Min. 1 year when stored in dark area at a temperature of 10°C to 30°C. Suggested uses: On most clean smooth surfaces (except any kind of plasticiser). Adhesive Performance Peel Strength 180°: Curing time 20 minutes Minimum 8 N/cm Test Method: FINAT; FTM 1 Average 15 N/cm Curing time 24 hours Minimum 10 N/cm Test Method: FINAT; FTM 1 Average 17 N/cm Static Shear Strength m 7days Test method: FINAT; FTM 8 Softening Point m 90°C Test method: ASTM; D-816 FINAT : Federation Internationale des Fabricants Transformateurs d’Adhesifs at Thermocolants ASTM : American Society for Testing and Materials Tested on anodised aluminium plates under laboratory conditions (23°C ± 2 and 60 ± 10% relative humidity.) Resistance Properties Oxidation Poor Migration Poor Plasticisers, oils Poor High Temperature Suitable High relative humidity Poor Low Temperature Suitable Polar Solvents (M.E.K. etc.) Poor U.V. Radiation Poor Non Polar Solvents (gasoline etc.) Suitable Temperature range -15°C to +90°C (depending on loading and relative humidity) General Directions for Use Minimum recommended bonding temperature is 10°C. Degrease the substrate with alcohol or spirit. (The substrate must be free of grease, moisture, dust, silicones,etc.) Remove protective paper and press tape into contact with the substrate, with special attention to the edges. Preferably, allow substrate and pressure sensitive tape to stand for 24 hours after applying load. The information in this Technical Sheet is based on reliable tests and trials. Given the diversity of the use of our products we advise our customers to ensure themselves that the product meets the requirements of their application. The responsibility for the application and use of the product remains with the customer. FTP 500 Revision 0° Edition 1a of 02/00 VELCRO - SELF ADHESIVE PS18 PRESSURE SENSITIVE ADHESIVE PS18 Base material: Water based acrylic polymer Colour: Colourless Shelf Life: Min. 3 years when stored in dark area at a temperature of 15°C to 25°C Suggested uses: On most clean and smooth surfaces (except polypropylene and other non-polar material). Adhesive Performance Peel Strength 180°: Curing time 20 minutes Minimum 8 N/cm Test Method: FINAT; FTM 1 Average 20 N/cm Curing time 24 hours Minimum 10 N/cm Test Method : FINAT; FTM1 Average 22 N/cm Static Shear Strength m 3 days Test method: FINAT; FTM8 Softening Point m 120°C Test method: ASTM; D-816 FINAT : federation Internationale des Fabricants Transformateurs d’Adhesifs at Thermocolants ASTM : American Society for Testing and Materials Tested on anodised aluminium plates under laboratory conditions (23°C ± 2 and 60 ± 10% relative humidity.) Resistance Properties Oxidation: Excellent Migration: Good Plasticisers, oils: Excellent High Temperature: Good High relative humidity: Poor Low Temperature: Good Polar Solvents (M.E.K. etc.): Poor U.V. Radiation: Excellent Non Polar Solvents (gasoline etc.): Good Temperature range: -20°C to +120°C (depending on loading and relative humidity) General Directions for Use Minimum recommended bonding temperature is 10ºC. Degrease the substrate with alcohol or spirit. (The substrate must be free of grease, moisture, dust, silicones,etc.) Remove protective paper and press tape into contact with the substrate, with special attention to the edges. Preferably, allow substrate and pressure sensitive tape to stand for 24 hours after applying load. The information in this Technical Sheet is based on reliable tests and trials. Given the diversity of the use of our products we advise our customers to ensure themselves that the product meets the requirements of their application. The responsibility for the application and use of the product remains with the customer. FTP 502 Revision 0° Edition 1a of 02/00. Velcro brand is a registered trademark of velcro industries B.V. |
|
| VELCRO Products | Hook and Loop | Our Services | About Us | Useful Resources | |
| Copyright © SCF Supplies 2008 | Web design by 7Soft.co.uk |